Shear, Cutter and Grinder Accessories

  • Featherweight Adaptor
    Spring loaded burnishing attachment. Allows the tool to float on the material surface to create a smooth engraving. The spring tension on this attachment is adjustable.

  • EZ Rider
    Spring loaded burnishing attachment. Provides light, even pressure allowing the tool to "float" over any irregularities in the material. Essential for making smooth lines with a constant width. Makes burnishing simple

  • Cutter Knobs
    Threaded brass knob that allows you to fasten the cutter into the spindle. Available for 1/8”, 11/64” and ¼” cutters.

  • Set Screws
    Threaded set screws to hold the cutter knob in place on the cutting tool. You must use the cutter wrench to fasten.

  • Cutter Knob Wrenches
    For adjusting set screws in cutter knobs.

  • Tip Protectors
    Plastic tip covers to protect the cutter tips.

  • Cutter Re-sharpening Services
    Re-sharpening is done using the same techniques and the same exact specifications used in the manufacturing of new cutters. Each cutter is ground to the extent required to remove any imperfections, the cutting edge is restored, and the tip is accurately sized. Unless otherwise specified, cutters will be re-sharpened to the size and for the material indicated on the knob. If the knob has no marking, please specify the application and desired size.

    We sharpen your own cutters, they are not exchanged.

  • Shear Alignment Sevice
    Engraver’s Express offers precision sharpening of shear blades as well as a complete shear alignment service for standard 12" shears.
Sitemap